Trying to get pregnant should be a happy and exciting time for you and your partner; you shouldn't have to worry about getting pregnant. The Clearblue Easy Fertility Monitor helps reduce the time that it takes to conceive.
The big advantage to the Clearblue Fertility Monitor is that it is easy to use, yet is very advanced and increases your chances of conceiving.
The way it works is you buy test sticks separately to the monitor and use one per test whenever the monitor tells you to test. A test stick is placed in your urine stream and then placed into the Clearblue Monitor for testing. A really good feature of the Clear Blue Monitor is you can program it to track the days of your monthly cycle.
So you have the greatest chance of conceiving; A low, high, and peak fertility status bars are shown in the monitor's display.
The "M' Button on the Monitor:
The Clearblue's unique 'M Button' is activated at the start of your monthly cycle. It sets the beginning of a 6-hour time period for testing. You should press the button at the start of your cycle but only when it's convenient to test; the first urine of the day. In order to test different times in your cycle, you're free to change the day and/or time you press the button on your next cycle.
The Clearblue Fertility Monitor accurately identifies more fertile days in your cycle than any other fertility monitor. About 10 or 12 days after your cycle starts is usually the most fertile time because your estrogen levels are higher. Male sperm can survive as much as five days, so your chances of conceiving are the best during these pre-ovulation days in your cycle
The Main Reasons For the Clearblue Easy Fertility Monitor's Ability To Identify Peak Periods of Fertility:
An egg begins developing inside an ovary during the 'Follicular Phase,' which is a time during these pre-ovulations days. The "LH surge" or rise in "Luteinizing Hormone" signals peak fertility during this time. Lasting only a couple days, this surge in this hormone is the most fertile time for you to conceive. Pinpointing this time with ease, the Clearblue monitor helps you identify this time when the follicle containing the egg bursts and releases the ovum. Only around twenty-four hours are you likely to conceive - when the egg is released. Identifying this most crucial time is what the Clearblue is all about.
During the 'Luteal Phase,' which is the fourteen days after ovulation, you are way less likely to get pregnant.
Performing A Routine Test
While in your testing 'window' and before your first urine of the day, turn on the Clearblue Fertility Monitor. Some mornings the monitor will indicate that you need to test your hormone levels. After removing a test stick from the wrapper, you wet it in your urine stream (pointing the stick downwards) for about three seconds. While maintaining the downward angle of the stick, remove the cap from the handle end and put it on the wet end..
At this point you should see a red flashing light in the test stick slot, which is the monitor performing an internal check to determine if the slot is ready to receive your test stick. Do not place the test stick into the slot at this time - wait until the red light has gone out. Simply hold the test stick by the cap and place the other end into the the slot, cut corner pointing down. Push it down until it clicks into place, lying flat. If you've inserted it correctly, the display will flash a small image of the test stick symbol for about five minutes as it performs the check of the urine.
You will be prompted to remove the stick and discard it after around five minutes. This will be indicated on the monitor's display. The monitor fertility status symbol will show the level of fertility in one of three simple bars - low, high, or peak.
Cathy has been writing helpful articles on fertility and health for years now. Discover more about the signs of infertility and what to do about it at http://www.clearbluefertilitymonitors.com
