The term made to measure roman blinds refers to a type of Roman window covering that is manufactured specifically for a given window having the exact same size measurement. This is meant to distinguish it from the other general type of blinds commonly known as ready-made.
When it comes to purchasing made to measure roman blinds, the first thing that obviously needs to be considered is the size of the window where the blind is set to be placed. This may involve an initial classification of the window which should either be one having a recess or one without it.
For the former, it is best to do the measurement with the use of a tape measure made of metal as this usually produces more accurate results. The measurement should be made from three different points, notably one from each end and an extra one from the middle.
The measurement with the smallest figure should serve as the width guide. However, if Roman blinds are to be used, the general recommendation is to reduce the chosen width measurement by at least one centimeter. The rationale for this has to do with having a smooth extension in case this is needed.
Additionally, when looking around for made to measure roman blinds, many manufacturers require the initial or original width measurement. This is because in many cases, these manufacturers automatically make the required one-centimeter reduction.
The same procedure should be followed when it comes to measuring the length of the blind. However, this time around, try to identify the narrowest measurement as this will serve as the length guide.
On the other hand, for windows having no recess, the width measurement should be given an additional 10 centimeters so that an overlap of five centimeters can be created on both window sides. If made to measure roller blinds are involved, an extra five centimeters may have to be added to the overall width measurement. The purpose of this is to allow the rolling mechanism sufficient room within which it can effectively operate.
For the blind length, it is best to initially determine the exact bottom area for the window covering. From the identified point, make the measurement up to the window top or up to the area where the blind is to be placed.
The window shape is one other thing that should be noted when it comes to made to measure roman blinds. In a few cases, some windows may come off as having unusual or non-traditional shapes. For this, it is best to ask for help from professional blinds manufacturers.
Charles works for Norwich Sunblinds. The company offer a wide range of blinds and awnings. When Joseph is relaxing, he likes to write articles on aspects to consider before purchasing made to measure Roman blinds.
